E-HEEC
All LED Hazardous Exit & Emergency Combo

Overview
All LED hazardous exit and emergency combination with two fully adjustable 3.6-watt MR-16 base LED lamp heads and a red or green LED EXIT. Fiberglass-reinforced polycarbonate housing in gray, with a corrosion-resistant enclosure, UV stabilized polycarbonate lens, molded gasket and stainless steel screws. A 6V/12V NiCd battery gives a minimum of 90 minutes of emergency illumination and recharges in 24 hours. The 12W and 15W models offer 4.8W and 7.8W of remote capacity.
Explore similar products

LC8 Series
Combo Units
Steel
LC8
Housing
Steel
Battery
Lead Calcium
Power
2.5W exit + 5.4W heads

LC8 Series
Combo Units
Steel
LC8
Housing
Steel
Battery
Lead Calcium
Power
2.5W exit + 5.4W heads

LPCX Series
Combo Units
Thermoplastic
LPCX
Housing
Thermoplastic
Battery
Lead Calcium
Power
Exit 2.5W | 5.4W heads standard (higher available) | 4.4-6.7W charge mode

LPCX Series
Combo Units
Thermoplastic
LPCX
Housing
Thermoplastic
Battery
Lead Calcium
Power
Exit 2.5W | 5.4W heads standard (higher available) | 4.4-6.7W charge mode
E-HEEC
All LED Hazardous Exit & Emergency Combo


Overview
All LED hazardous exit and emergency combination with two fully adjustable 3.6-watt MR-16 base LED lamp heads and a red or green LED EXIT. Fiberglass-reinforced polycarbonate housing in gray, with a corrosion-resistant enclosure, UV stabilized polycarbonate lens, molded gasket and stainless steel screws. A 6V/12V NiCd battery gives a minimum of 90 minutes of emergency illumination and recharges in 24 hours. The 12W and 15W models offer 4.8W and 7.8W of remote capacity.
Specifications
Mounting Type
Surface Wall or Pendant
Housing Spec
Fiberglass-reinforced polycarbonate, gray
Power
6 or 12V, 12-15W
Battery Spec
NiCad
Compliance
Phase
None
Capacity
12W | 15W
Features
Standard Features
Red or green LED EXIT | Two 3.6W MR-16 LED heads | Fiberglass-reinforced polycarbonate | Corrosion-resistant gasketed enclosure | Dual 120/277V | 6V/12V NiCd battery | 90-min emergency illumination | 24hr recharge | Bi-color battery indicator | Magnetic test switch | Snap-out chevrons | Pre-installed conduit hub
Available Options
Self diagnostic (E) | Cold weather (CW) | Tamper-proof (TP) | No heads (NH)
E-HEEC
Contact us to get a quote about this product
Features
Polycarbonate
Housing
Single or Double, 2 MR-16 LED Heads
Faces
NiCad
Battery
120/277 VAC
Voltage